Specifications and Features

• Fuel Cell Sensor: high specificity to alcohol, unaffected by other possible breath contaminants.

• Warm-up Time: the instrument is ready for use within 15 seconds of switch on, at any temperature.

• Measuring Range: normally 0.02 to 2.00mg/litre BrAC. An overrange indication is given at higher levels.

• Analytical Response Time: normally within 30 seconds; but within 5 seconds at zero alcohol levels.

• Date and Time: each test result is stored with date and time [internal battery backed].

• Temperature Range: from -5°C to +40°C, for optimum operation.

• Recalibration: at least every six months, using either a wet-bath simulator or AlcoCal® gas standard.

• Recovery Times: typically 10 seconds at zero alcohol; 60 seconds at 0.35mg/litre BrAC; 4 minutes at 2.00mg/litre.

• Memory Capacity: 500 tests as standard, expandable up to 5,000.

• Print Copies per Charge: approximately 120.

• Printer Recharging Time: approximately 14 hours.

• Print Copies per Paper Roll: approximately 120.

• 400 Power Supply: 5 new AA cells give at least 3,000 breath tests. Two stage low power warning system.

• Radio Frequency Immunity: exceeds requirement of EN 50082-1.

• Shock/Vibration: impact resistant ABS: meets IEC 68-2-27 Part 2.1 Test EA and IEC 68-2-6 Part 2.1 Test FC.

• Dimensions and Weight: Shoulder Bag: 250 x 330 x 130mm; 2.5Kg [complete with contents].

• Hard Carry Case: 460 x 380 x 170mm; 5.5Kg [complete with contents].